twitter
    Find out what I'm doing, Follow Me :)

Build a cable yourself for Wi-Fi

With the right set of tools, building a cable is a step-by-step process:
1. Prepare the cable
2. Slide the crimp ring onto the cable
3. Strip off the outer jacket
4. Pull back the inner shield
5. Strip the dielectric foam core
6. Remove any shorting material on the foam core
7. Cut the center conductor to correct size
8. Place the center pin onto the center conductor
9. Crimp the center pin
10. Place the connecter body onto the cable
11. Replace shield over the connector body
12. Place the crimp ring over the shield and connector body
13. Crimp the crimp ring
14. Inspect your finished product